Henning's Shop
1629 Atwood Street, Longmont, CO 80501, USA

Order Online or Call +1.720.352.1080 (GMT -7)
tanfoglioparts.com
Trigger System Magazines Henning Mag Pads Spare Parts Kit Holsters
Thumb Safeties Magazine Parts Henning XL Firing Pin Pins, Springs, Screws Mag Pouches
Frame Parts Iron Sights EGW Custom Parts Consumables C-More Sights
Upper Parts Grip Panels Wolff Springs Package Deals Scope Mounts
T-Shirts
Tanfoglio Upper Assembly Parts

The "Upper Assembly" is typically referred to as everything that goes into the slide and can be taken off as one unit by removing the slide stop from the frame. Barrels, comps and slides are not currently available in my store. All general medium sized parts is covered on this page. The only other parts are minor springs, pins and firing pin stop plate which you will find in the Pins, Springs, Screws section and front and rear sights which will you find in Sights section. For more details on the after market Wolff springs see Tuning Parts.


Firing Pin

Several firing pins are available for the Tanfoglio pistols. Only the Factory is available for both Large and Small frame. Make sure you know what you have. If you don't, measure your magazines! For more details check out Henning XL Firing Pin and EGW Custom Parts.
Magazines measure:
Factory Firing Pin, Large Frame
1.345" x 0.850"
Price: $25.00
Qty:
Factory Firing Pin, Small Frame
1.250" x 0.800"
Price: $25.00
Qty:
Henning X-Long Firing Pin
Fits Large Frame Only
Price $25.00
Qty:
EGW Firing Pin
Fits Large Frame Only
Price $25.00
Qty:

Guide Rod

Comes in two different lengths!
The short fits Tanfoglio Stock and the Tanfoglio Gold Team 2007 model.
The long fits Tanfoglio Limited and Tanfoglio Gold Team 2006 models and older.
Price: $30.00 Qty:

Guide Rod Bushing (Reverse Plug)

The Reverse plug is used on all bull barrel and cone compensated models. This includes the Gold Team, Limited and Stock models. For all straight barreled modes you do not need a reverse plug.
Price: $24.00 Qty:
Slide Racker

For Gold Team. This slide-racker has been cut and fitted to slide right into your Tanfoglio / EAA slides. Tightens with a set screw.
Price: $60.00 Qty:
Extractor

A spare part for your shooters bag for sure. I recommend replacing them every 8,000 rounds. The main part I inspect for wear on a regular basis. Irregular and only with bad brass, but case separation can damage the extractor. So far, only happened to me with 40 S&W and very fast burning powders.
Price: $25.00 Select Caliber:  Qty:



Home
© 2007 Henning's Shop LLC.
All rights reserved.